Editorial Board Member

Lili Zhou
Gannan Medical University, China

Lili Zhou
Affiliation	Gannan Medical University
Country	China
Scopus ID	55574214519
Documents	85
Citations	730
h-index	15
Subject Area	Materials Science
Event	International Academic Excellence Awards
ORCID	0000-0002-0910-8689

Lili Zhou is a researcher whose supplied academic profile lists Gannan Medical University, China, as the institutional affiliation and Materials Science as the subject area. The profile reports 85 documents, 730 citations and an h-index of 15. The selected publications focus on metallic glasses, high-entropy alloy composites, shear-band behaviour, glass-forming ability and the mechanical properties of layered materials. These topics contribute to research into how material structure, processing conditions and deformation mechanisms influence performance. The bibliometric figures represent the supplied database snapshot and should be interpreted alongside the scope, methods and findings of individual publications. [1]

Abstract

This article presents the supplied academic profile of Lili Zhou and five selected publications concerning materials structure, mechanical response and metallic-glass behaviour. The listed studies address strain localization in high-entropy alloy composites, data-driven assessment of glass-forming ability, pressure effects during tungsten solidification, strengthening in tungsten/molybdenum nanolayers and shear-band development in an amorphous alloy. Collectively, these subjects relate to understanding how composition, microstructure and external conditions influence the behaviour of advanced materials. Publication details and DOI links are included as supplied; specific conclusions should be drawn from the original articles rather than inferred from titles alone. [2]

Keywords

Lili Zhou; Materials Science; metallic glasses; high-entropy alloys; amorphous alloys; strain localization; glass-forming ability; tungsten; molybdenum; nanolayered composites; shear bands; materials modelling.

Introduction

Advanced materials research examines relationships between composition, atomic arrangement, microstructure and macroscopic performance. Metallic glasses and high-entropy alloys are of interest because their structural characteristics can produce complex deformation and mechanical responses. Computational simulations and data-driven methods provide complementary approaches for studying these systems, helping researchers investigate trends and mechanisms that may be difficult to isolate experimentally. The supplied publication list reflects these research themes across several journals. [3]

Research Profile

The supplied profile identifies Scopus Author ID 55574214519 and ORCID 0000-0002-0910-8689. It records 85 documents, 730 citations and an h-index of 15. These measures provide a snapshot of indexed publication and citation activity, rather than a complete assessment of research quality or influence. Author identifiers can help readers locate records and distinguish scholarly profiles. [1]

Research Contributions

The selected work spans several connected questions in materials science. Studies of amorphous alloys consider glass-forming characteristics and shear-band formation, while research on composite and nanolayered systems examines strain distribution and strengthening mechanisms. Work on tungsten solidification considers how pressure may affect phase stabilization under non-equilibrium conditions. Together, these topics illustrate the use of experimental evidence, modelling and data analysis to investigate material behaviour. The significance of each contribution should be evaluated using the methods and findings reported in the corresponding paper.

Publications

1. “Effects of crystalline-to-amorphous volume ratio and void location on strain localization in HEA composites.” Journal of Materials Research and Technology (September 2026). DOI: 10.1016/j.jmrt.2026.08.024. [2]
2. “Data-driven trend assessment of glass-forming ability in metallic glasses using experimental characteristic temperatures.” Materials & Design (August 2026). DOI: 10.1016/j.matdes.2026.116466. [3]
3. “Pressure-induced suppression of TCP stabilization during non-equilibrium solidification of liquid tungsten.” Physica Scripta (May 2026). DOI: 10.1088/1402-4896/ae65e1. [4]
4. “Simulation study on the strengthening mechanism of W/Mo nanolayered composites under tensile loading.” Materials Today Communications (April 2025). DOI: 10.1016/j.mtcomm.2025.112300. [5]
5. “Understanding the initiation and propagation of shear bands of amorphous Ca65Mg15Zn20 alloy by tracing method.” Intermetallics (October 2024). DOI: 10.1016/j.intermet.2024.108402. [6]

Research Impact

The supplied citation count and h-index indicate measurable citation activity within the referenced profile. However, citation indicators vary across databases and change over time. A fuller assessment of research impact should consider reproducibility, methodological quality, relevance to materials design and the extent to which findings support further scientific investigation. Bibliometric indicators should therefore complement, rather than replace, direct evaluation of the publications. [1]

Award Suitability

This profile is prepared in the context of the International Academic Excellence Awards. The listed publications and reported research metrics may be relevant to an academic assessment in Materials Science. Any formal award decision should follow the organizer’s eligibility criteria and rely on independently verified publications, research contributions and supporting evidence. This article does not itself confirm an editorial-board appointment or award outcome.

Conclusion

Lili Zhou’s supplied profile records scholarly activity associated with Materials Science, including research on metallic glasses, alloy composites and deformation mechanisms. The five selected publications provide examples of the topics represented in the supplied bibliography. The profile metrics offer a quantitative snapshot, while the DOI links enable readers to consult the original publication records for methods, findings and limitations.

External Links

• ORCID Profile
• Scopus Author Profile
• International Academic Excellence Awards

References

1. Elsevier. (n.d.). Scopus author details: Lili Zhou, Author ID 55574214519. Scopus. https://www.scopus.com/authid/detail.uri?authorId=55574214519
2. “Effects of crystalline-to-amorphous volume ratio and void location on strain localization in HEA composites.” (2026). Journal of Materials Research and Technology. DOI: https://doi.org/10.1016/j.jmrt.2026.08.024
3. “Data-driven trend assessment of glass-forming ability in metallic glasses using experimental characteristic temperatures.” (2026). Materials & Design. DOI: https://doi.org/10.1016/j.matdes.2026.116466
4. “Pressure-induced suppression of TCP stabilization during non-equilibrium solidification of liquid tungsten.” (2026). Physica Scripta. DOI: https://doi.org/10.1088/1402-4896/ae65e1
5. “Simulation study on the strengthening mechanism of W/Mo nanolayered composites under tensile loading.” (2025). Materials Today Communications. DOI: https://doi.org/10.1016/j.mtcomm.2025.112300
6. “Understanding the initiation and propagation of shear bands of amorphous Ca65Mg15Zn20 alloy by tracing method.” (2024). Intermetallics. DOI: https://doi.org/10.1016/j.intermet.2024.108402
7. ORCID. (n.d.). ORCID record for Lili Zhou. https://orcid.org/0000-0002-0910-8689